Flow dividers

MTO gear flow divider with aluminum housing

Available from 2 to 12 sections

All inlet ports have an internal connection and every second chamber has an inlet port.

We offer two different executions: A – is executed with an into the housing integrated combined pressure relief and suction valve. The G - version is without this valve.

Data table
Size Type Displacement per section Flow per section Working pressure
minimum maximum Continuous Peak
(cm3/rev.) (l/min) (l/min) (bar) (bar)
0 MTO-..- 1 0,99 0,35 4 250 280
1 MTO-..- 4 4,2 1,6 9 250 280
1 MTO-..- 5 5,5 2,2 12 230 250
2 MTO-..- 8 8,16 3,5 19 250 280
2 MTO-..- 14 14,45 5,0 32 250 280
2 MTO-..- 31 31,4 12,5 62 210 240

Flow dividers

MTO Gear flow divider with cast iron housing

Available from 2 to 12 sections in two sizes

Version EA – with in- and outlet blocks for endposition compensation made from steel (EA9) or aluminum (EA7). The sectional inletblocks are manufactured with an internal connection and variable usable inlet ports. The outlet blocks have integrated pressure relief valves for seondary loop protection, suction valves and measuring ports for each section. Version G/S - is without blocks and valves.

Data table
Size Type Displacement per section Flow per section Working pressure
minimum maximum Continuous Peak
(cm3/rev.) (l/min) (l/min) (bar) (bar)
3 MTO-..- 25 24,9 12 66 270 290
3 MTO-..- 35 34,3 16 82 260 285
3 MTO-..- 55 54,5 27 98 260 285
3 MTO-..- 80 78,7 40 140 260 285
4 MTO-..- 110 105,4 50 200 270 290
4 MTO-..-150 149,7 80 220 235 250

Flow dividers

HTO Gear flow divider with cast iron housings with integrated valves

Available from 2 to 12 sections

The HTO series includes integrated inlet and outlet blocks as well as higher working pressures up to 320 bar/4,600 psi. 

Furthermore, the HTO's inner components have been optimized in a way that there are only two sizes necessary to cover the 4 sizes required in the MTO series. 

The HTO series is only available with end position compensation. The pressure-relief and suction valves are integrated into the housing.

Data table
Size Type Displacement per section Flow per section Working pressure
minimum maximum Continuous Peak
(cm3/rev.) (l/min) (l/min) (bar) (bar)
3 HTO-..- 35 34,3 12 82 320 380
3 HTO-..- 80 78,7 27 140 320 380
4 HTO-..- 110 105,4 50 200 320 380
4 HTO-..- 150 149,7 80 220 320 380

Flow dividers

MT-GM Series Radial Piston Flow Dividers

Available from 2 to 3 sections

Based on coupled radial piston motors.

FEA with steel blocks is executed for endposition compensation with integrated pressure relief valves, suction valves and measuring ports for each section. FG is without endposition compensation.


Flow dividers

MTL Series Radial Piston Flow Dividers

Available from 2 to 12 sections in six sizes

The EA version includes steel blocks for end position compensation with integrated pressure relief valves, suction valves and measuring ports for each section. The G version does not include end position compensation.

Data table
Type Displacement per section Flow per section Working pressure Max. power per section
minimum maximum Continuous Peak
(cm3/rev.) (l/min) (l/min) (bar) (bar) (kW)
MTL-../29 30,2 28 40 240 300 14
MTL-../42 42,7 45 65 240 300 30
MTL-../70 69,9 63 90 240 300 20
MTL-../108 108,4 95 135 240 300 45
MTL-../170 170,9 110 160 240 300 55
MTL-../270 271,4 175 250 240 300 75

Flow dividers

STL Series Radial Piston Flow Dividers

Available from 2 to 12 sections in two sizes

The EA version includes steel blocks for end position compensation with integrated pressure relief valves, suction valves and measuring ports for each section. The S version does not include end position compensation.

Data table
Type Displacement per section Flow per section Working pressure Max. power per section
minimum maximum Continuous Peak
(cm3/rev.) (l/min) (l/min) (bar) (bar) (kW)
STL..-/220 494,1 220 280 240 300 100
STL..-/320 722,2 320 400 240 300 125

Flow dividers

MKA/MKS Series Piston Divider Valves

Two section flow divider valve in two different sizes

The MKA and MKS flow dividers have two sections and are available in two different sizes. Total flow rates from 2 to 150 l/min / 0.53 to 39.63 gpm. The valves are bidirectional (dividing and re-unifying). The dividing proportion is widely independent from pressure and viscosity within the synchronization error rate.

MKA housings are made from aluminium with peak pressures of 210 bar / 3,000 psi.

MKS housings are made from steel with peak pressures of 350 bar / 5,000 psi.

Data table
Type MKA Type MKS Total flow Total flow Peak pressure Peak pressure
minimum maximum Type MKA Type MKS
(l/min) (l/min) (bar) (bar)
- MKS-0/6 2 6 - 315
MKA-1/12 MKS-1/12 4 12 210 350
MKA-1/24 MKS-1/24 12 24 210 350
MKA-1/40 MKS-1/40 24 40 210 350
MKA-2/90 MKS-2/90 40 90 210 350
MKA-2/150 MKS-2/150 90 150 210 350

Flow dividers

valve block divider

2 Fold

We would like to introduce our new developed valve based accuracy solution.

It is characterized by high synchronization accuracy even with different loads and low flows, low demands of installation space and low weight.

In addition, the circuit diagram can be kept simpler for end position compensation, because the "suction function" required for rotary flow dividers can be omitted.

Please note that this accuracy solution is only suitable for rod side connected double-acting cylinders and, due to the valve technology, special attention must be paid to the cleanliness of the operating medium by using filters with 10 µm.

Data table
Type Flow per section Working pressure
minimum maximum up to
(l/min) (l/min) (bar)
MS-2-6 1 6 210
MS-2-12 2,5 12 210
MSZ-2-12-IS 2,5 12 210